涂料油墨：实验配方A、马来松香树脂液配方名 称 数量(份)马来松香树脂(山东公司产) 35异丙醇 20工业乙醇 27氨水 8去离子水 10B、黑色油墨配方名 称 数量(份)马来松香树脂液(上述A) 50工业乙醇 14去离子水 9丙二醇甲醚 4.5水性炭黑(天津产) 10华兰(石家庄产) 1.5青莲 0.5SR丙烯酸弹性树脂(深圳艾美捷) 10消泡剂 0.52、耐水、耐磨检测方法：按照上述实验配方，检测编织袋专用水性油墨的细度、粘度。放置24小时之后，用丝棒展于编织袋上。
       待完全干燥后，24小时后将印好的墨样剪下一块浸于盛有清水的烧杯中，放置观察刮样的变色程度以及溶液的染色程度。再用弧形耐摩擦试验机测定仪(块重量为0.5Kg)对干燥印样的抗摩擦性能进行检测。牢度检测：印好的样品干燥后放置24小时。再对印样进行抗搓揉性检验，在手工搓揉达到30次时为合格。实验检测的主要数据：对所得油墨的各项指标进行检测，得到如表3.8所示结果。编织袋水性油墨的检测结果项目指标细度≤10μm耐水性4级(>144h)光泽≥60搓揉牢度≥30印刷速度80m/min关键词：质感涂料施工大理石涂料
      Paint ink: experimental formula A, maleic rosin resin liquid formula name number ( a ) of maleated rosin resin (Shandong production ) of 35isopropyl20industrial ethanol deionized water,27 ammonia810B black ink formulation name number ( a ) of maleated rosin resin liquid ( the A )50149industrial ethanol deionized water propylene glycol monomethyl ether4.5aqueous carbon black ( Tianjin production Westlands )10( Shijiazhuang)1.5street0.5SR acrylic elastic resin ( Shenzhen Emmy Czech )10antifoaming agent0.52, water-resistant, wear-resistant detection method: according to the experimental formula, detection of woven bags for water-based ink fineness, viscosity. Placed after 24 hours, with wire rod show in knitting bag.
    To be completely dry, after 24 hours of printed ink sample cut a piece of immersion in filled with clean water in the beaker, placed on the degree of color change of scraping and solution dyeing degree. Then the arc friction test machine tester ( weight0.5Kg ) on drying prints anti friction performance testing. Fastness test: printed samples dried for 24 hours. The printed sample resistance test in hand rub rub, reached 30times for qualified. Experimental detection of the main data: for the ink of the targets for testing, are as shown in table 3.8the results of. Woven bags ink detection result item index size = 10μ m water-resistance level 4( >144h )≥ 60rubbing fastness gloss≥ 30printing speed80m/min key words: texture coating construction marble coating